4 Cores G.652D
|Cable Diameter||9.6x21 (mm)|
|Tensile Strength Long/Short term||3000/8000(N)|
|Crush Resistance Long/Short term||1000/3000(N/100mm)|
|Bending Radius Static/Dynamic||10D/20D(mm)|
|The ﬁbers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are ﬁlled with a water-resistant ﬁlling compound. A steel wire locates in the center of core as a metallic strength member. The tube(and ﬁllers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate(APL) moisture battier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be ﬁgure 8 structure.|
ﬁgure 8 cable GYTC8Y, GYTC8Y are also available on request.
This type of cable is speciﬁcally applied for self-supporting aerial installation.
|▶ High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cast.|
▶ Good mechanical and temperature performance.
▶ High strength loose tube that is hydrolysis resistant.
▶ Special tube ﬁlling compound ensure a critical protection of ﬁber.
▶ The following measures are taken to ensure
the cable watertight:
▶ Steel wire used as the central strength member
▶ Loose tube ﬁlling compound
▶ 100% cable core ﬁlling
▶ APL moisture barrier
|GYTC8S cable complies with standard YD/T 901-2001 as well as IEC60794-1|
|Marking||HELLOSIGNAL GYTC8S 4 Cores G.652D xxxxM|
(or Per customer's request)
|Inner Package||2000m/Spool (or Per customer's request)|
|Outer Package||Pallet (or Per customer's request)|
|Delivery time||Normally 25 days after received the deposit.|
|Brand||HELLOSIGNAL® OR OEM|