| 0.7mm Copper Clad Aluminum Wire |
|
|
|
|
|
| Construction Parameters: |
| Nomial diameter Φ /mm | 0.7mm |
| Diameter difference ±mm | ±0.007mm |
| Copper content % | 27 % |
| Density (20 ℃) g／cm3 | 3.3 g／cm3 |
| Intensity test of the soft state ≥N | ≥46 N |
| Tensile strength of soft-state≥N／mm2 | ≥120 N／mm2 |
| Hard measured intensity ≥N | ≥103 N |
| Tensile strength of hard-state≥N／mm2 | ≥270 N／mm2 |
|
|
|
|
|
|
| Electrical Characteristics: |
| Resistivity (20℃) ≤Ω.km／mm2 | ≤27.5 Ω.km／mm2 |
|
| Measured resistance (20 ℃) ≤Ω／km | ≤71.4Ω／km |
| Conductivity (20 ℃) ≥% | ≥63 % |
|
| Soft-state elongstion≥% | ≥12 % |
|
| Hard elongation≥% | ≥15 % |
|
|
|
| Product Inspection: |
| Inspection Item | Standard Requirement （ASTM B 566-93） | Inspection Result |
| 1. Surface | Bright, Clean, no flaw | OK |
| 2. Diameter (mm) | 0.7(+/-0.007mm) | OK |
| 3. Tensile Strength (N／mm2) | ≥120 N／mm2 | OK |
| 4. Elongation (%) | ≥12 % | OK |
| 5. Density (g/cm3) | 3.3 (±0.03）g／cm3 | OK |
| 6. Resistivity (20℃) ≤Ω.km／mm2 | ≤27.5 Ω.km／mm2 | OK |
| 7. Conductivity (%IACS) | ≥63 % | OK |
| Conclusion | Pass |
|
|
|
| Order Informations: |
| Technical Parameter | based on customer’s requirements |
| Package | Please advise the spool size or your special requirements |
| Delivery time | Normally 20-25 days after received the deposit. |
| Application | braid shielding & cable conductor (single or stranded) for coaxial cable, power cable, signal cable, network cable, data cable, enameled wire etc |
| More informations | please contact with us. |
|
|
|
|
| Online Service: |
| Skype | stephen689205 |
|
| qq | 2488273792 |
|
| whatsapp | 86 15868821925 |
|
|
|
|
|
|
|
|
| http://www.zion-cca.com |
| https://zioncommunication.en.alibaba.com/ |