Technical Parameters

Cable Code

GYTC8S

Fiber Count

4

Cable Diameter

9.6x21 (mm)

Cable Weight

270(kg/km)

Tensile Strength Long/Short term

3000/8000(N)

Crush Resistance Long/Short term

1000/3000(N/100mm)

Bending Radius Static/Dynamic

10D/20D(mm)

Storage/Operating Temperature:-40℃to+70℃

Cross Section

Description

The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tubes are filled with a water-resistant filling compound. A steel wire locates in the center of core as a metallic strength member. The tube(and fillers) are stranded around the strength member into a compact and circular cable core. After an Aluminum Polyethylene Laminate(APL) moisture battier is applied around the cable core, this part of cable accompanied with the stranded wires as the supporting part are completed with a polyethylene(PE) sheath to be figure 8 structure.
figure 8 cable GYTC8Y, GYTC8Y are also available on request.
This type of cable is specifically applied for self-supporting aerial installation.  

Characteristics

▶ High tensile strength of stranded wires meet the requirement of self-supporting and reduce the installation cast.
▶ Good mechanical and temperature performance.
▶ High strength loose tube that is hydrolysis resistant.
▶ Special tube filling compound ensure a critical protection of fiber.
▶ The following measures are taken to ensure
the cable watertight:
▶ Steel wire used as the central strength member
▶ Loose tube filling compound
▶ 100% cable core filling
▶  APL moisture barrier
▶  Application:Self-supporting

Standards

GYTC8S cable complies with standard YD/T 901-2001 as well as IEC60794-1

Order Informations

Marking

HELLOSIGNAL GYTC8S 4 Cores OM1 62.5/125 xxxxM
(or Per customer's request)

Inner Package

2000m/Spool (or Per customer's request)

Outer Package

Pallet (or Per customer's request)

Delivery time

Normally 25 days after received the deposit.

Brand

HELLOSIGNAL®  OR OEM