GYXTW53 - Center Bundle heavy Armored Optical Fiber Cable
Product Description
Center Bundle heavy Armored Optical Fiber Cable ( GYXTW53 )
| Introduction | ||||||
| The fibers are placed in a losse tube made of PBT.The tube is filled with a water-resistant filling compound.The tube is wrapped with a layer of PSP longitudinally. Between the PSP and the loose tube water -blocking material is applied to keep the cable compact and waterlight. Two parallel steel wires are placed at the two sides of the steel tape,over which a thin PE inner sheath is applied. After the PSP is longitudinally applied over the inner sheath,the cable is completed with a PE outer sheath. | ||||||
| Technical Parameters: | ||||||
| No. of fibers | No.of fibers per tube (max) | No.of elements | Tube diameter | Jacket | Short term tension | Short term crush |
| 4 count | 4 count | 1 count | 2.0±0.05mm | 12.4mm(1.8) | 3000N | 3000N/100mm |
| Test method and Mechanical Characteristic | ||||||
| Tensile Strength | confirm to IEC 794-1-E1 | Temperature requirement | Operation | -40℃ - +60℃ | ||
| Crush | confirm to IEC 794-1-E3 | Installation | -10℃ - +60℃ | |||
| Impact | confirm to IEC 794-1-E4 | Storage/Tran-sportation | -40℃ - +60℃ | |||
| Repeated bending | confirm to IEC 794-1-E6 | |||||
| Torsion | confirm to IEC 794-1-E7 | Temperature cycling test | confirm to IEC 794-1-F1 | |||
| Flexing | confirm to IEC 794-1-E8 | |||||
| Cable bend | confirm to IEC 794-1-E11 | Bending Radius | Unloaded | 10 times of outer diameter | ||
| Water penetration | confirm to IEC 794-1-F5B | Loaded | 20 times of outer diameter | |||
| Fiber Color Code | ||||||
| 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 |
| Blue | Orange | Green | Brown | Gray | White | Red | Black |
| Specification for GYXTW and GYXTW53 | 2-12 Cores | Description | Single Mode | Multi Mode | ||
Production Process Flow Chart
# 1： Fiber testing
# 2 Fiber core coloring
# 3 Fiber core coloring
#4 Fiber tube producing line
#5 PBT control
#6 Fiber twist
#7 Fiber twist2
#8 Jacket Finishing 1
#9 Jacket Finishing 2
#10 Process testing
#11 Packing
#12 Container Loading
# 2 Fiber core coloring
# 3 Fiber core coloring
#4 Fiber tube producing line
#5 PBT control
#6 Fiber twist
#7 Fiber twist2
#8 Jacket Finishing 1
#9 Jacket Finishing 2
#10 Process testing
#11 Packing
#12 Container Loading