NO.7110463 PH120 4×4.0mm² Fire Alarm Cables
Specification
PH120 4×4.0mm⊃2; Fire Alarm Cables NO.7110463 | ||||
CABLE CONSTRUCTION: | ||||
Conductor: | 4.0mm(sqmm) Plain annealed copper wire, | |||
Insulation: | Fire resistant silicone rubber | |||
Dia.over Dielectric:4x(0.0150"(3.8 mm)) | ||||
Insulation Color: | Blue/Brown | |||
Flame Barrier: | Fibre Glass Tape | |||
Drain Wire: | 0.80 mm Solid tinned copper | |||
Shield: | Aluminum PET (100% Coverage 20% overlapping) | |||
Jacket: | FR-LSZH (Red or White) | |||
Dia.over Jacket: 0.452''±0.006''(11.50±0.15mm) | ||||
HFFR EN 50290-2,BS7655 LTS1/LTS3,VDE 0207 | ||||
Print Legend: | HELLOSIGNAL Fire Alarm Cable PH120 4.0mm⊃2; 4 Cores Class N BC BS 50200:2006 NO.7110463 ××××M/FT | |||
ELECTRICAL PROPERTIES(at20℃): | ||||
Min.Bend Radius: | 8×Diameter | |||
Min.Insulation resistance: | 200 MΩ/km | |||
Max.Working Temperature: | .-30℃~+90℃ | |||
Test voitage: | 2000 V | |||
Max.Operating voitage: | 300 V / 600 V | |||
Max.resistance of Cond: | Class1,2：4.55Ω/km | Class5：4.9Ω/km | ||
Current Carrying Capacity: | ||||
Nominal Capacitance: | ||||
Cross Section : | ||||
Test Standards | ||||
Flame Tests | Insualtion Integrity | Smoke Density | Corrosive Gas Easurement | |
BS 4066 part 1 & 3 | IEC 60331 | BS 7622 | BS EN 50267-2-2 | |
EN 50266-2-4 | BS 6387 CWZ | IEC/EN 61034 | IEC 60754-2 | |
IEC 60332-3-24 | EN 50200 PH120 | HD 606 | BS 6425 | |
IEC/EN 60332-1 | ||||
Order Informations : | ||||
Package | 100M/Wooden Spool,200M/Wooden Spool,500M/Wooden Spool | |||
Delivery time | Normally 25 days after received the deposit. | |||
Brand | HELLOSIGNAL® OR OEM | |||