0.16mm Copper Clad Aluminum Wire |
|
|
|
|
|
Construction Parameters: |
Nomial diameter Φ /mm | 0.16mm |
Diameter difference ±mm | ±0.003mm |
Copper content % | 27 % |
Density (20 ℃) g/cm3 | 3.3 g/cm3 |
Intensity test of the soft state ≥N | ≥2.4 N |
Tensile strength of soft-state≥N/mm2 | ≥120 N/mm2 |
Hard measured intensity ≥N | ≥5.4 N |
Tensile strength of hard-state≥N/mm2 | ≥270 N/mm2 |
|
|
|
|
|
|
Electrical Characteristics: |
Resistivity (20℃) ≤Ω.km/mm2 | ≤27.5 Ω.km/mm2 |
|
Measured resistance (20 ℃) ≤Ω/km | ≤1367Ω/km |
Conductivity (20 ℃) ≥% | ≥63 % |
|
Soft-state elongstion≥% | ≥10 % |
|
Hard elongation≥% | ≥12 % |
|
|
|
Product Inspection: |
Inspection Item | Standard Requirement (ASTM B 566-93) | Inspection Result |
1. Surface | Bright, Clean, no flaw | OK |
2. Diameter (mm) | 0.16(+/-0.003mm) | OK |
3. Tensile Strength (N/mm2) | ≥120 N/mm2 | OK |
4. Elongation (%) | ≥10 % | OK |
5. Density (g/cm3) | 3.3 (±0.03)g/cm3 | OK |
6. Resistivity (20℃) ≤Ω.km/mm2 | ≤27.5 Ω.km/mm2 | OK |
7. Conductivity (%IACS) | ≥63 % | OK |
Conclusion | Pass |
|
|
|
Order Informations: |
Technical Parameter | based on customer’s requirements |
Package | Please advise the spool size or your special requirements |
Delivery time | Normally 20-25 days after received the deposit. |
Application | braid shielding & cable conductor (single or stranded) for coaxial cable, power cable, signal cable, network cable, data cable, enameled wire etc |
More informations | please contact with us. |
|
|
|
|
Online Service: |
Skype | stephen689205 |
|
qq | 2488273792 |
|
whatsapp | 86 15868821925 |
|
|
|
|
|
|
|
|
http://www.zion-cca.com |
https://zioncommunication.en.alibaba.com/ |
|
|
|