0.1mm Copper Clad Aluminum Wire
Product Description
| ||
0.1mm Copper Clad Aluminum Wire | ||
Construction Parameters: | ||
Nomial diameter Φ /mm | 0.1mm | |
Diameter difference ±mm | ±0.003mm | |
Copper content % | 27 % | |
Density (20 ℃) g／cm3 | 3.3 g／cm3 | |
Intensity test of the soft state ≥N | ≥0.9 N | |
Tensile strength of soft-state≥N／mm2 | ≥120 N／mm2 | |
Hard measured intensity ≥N | ≥2.1 N | |
Tensile strength of hard-state≥N／mm2 | ≥270 N／mm2 | |
Electrical Characteristics: | ||
Resistivity (20℃) ≤Ω.km／mm2 | ≤27.5 Ω.km／mm2 | |
Measured resistance (20 ℃) ≤Ω／km | ≤3501Ω／km | |
Conductivity (20 ℃) ≥% | ≥63 % | |
Soft-state elongstion≥% | ≥8 % | |
Hard elongation≥% | ≥10 % | |
Product Inspection: | ||
Inspection Item | Standard Requirement （ASTM B 566-93） | Inspection Result |
1. Surface | Bright, Clean, no flaw | OK |
2. Diameter (mm) | 0.10 (+/-0.003mm) | OK |
3. Tensile Strength (N／mm2) | ≥120 N／mm2 | OK |
4. Elongation (%) | ≥8 % | OK |
5. Density (g/cm3) | 3.3 (±0.03）g／cm3 | OK |
6. Resistivity (20℃) ≤Ω.km／mm2 | ≤27.5 Ω.km／mm2 | OK |
7. Conductivity (%IACS) | ≥63 % | OK |
Conclusion | Pass | |
Order Informations: | ||
Technical Parameter | based on customer’s requirements | |
Package | Please advise the spool size or your special requirements | |
Delivery time | Normally 20-25 days after received the deposit. | |
Application | braid shielding & cable conductor (single or stranded) for coaxial cable, power cable, signal cable, network cable, data cable, enameled wire etc | |
More informations | please contact with us. | |
Online Service: | ||
Skype | stephen689205 | |
2488273792 | ||
86 15868821925 | ||