GJXFH-2 - FTTH Drop Cable
Product Description
FTTH Drop Cable ( GJXFH-2)
| Introduction | ||||||
| This flat drop cable, which consists of 1,2, or 4 color coded optical fibers, offers an ideal solution for the smaller fiber counts that are needed in the final sections of an optical network. Two parallel FRP strength members protect the optical fibers. The cabl is completed with a LSZH jacket. | ||||||
| G652D fiber information | ||||||
| Mode field diameter (1310nm): 8.6μm±0.5μm Cladding diameter: 125μm±0.7μm Coating diameter:245μm±7μm Cut off wavelength of cabled fiber ：≤1260μm Attenuation at 1310nm:≤0.35dB/km Attenuation at 1550nm:≤0.21dB/km Bending loss at 1550nm (100 turns,30mm radius): ≤0.05dB Dispersion at 1550nm: ≤18ps/(nm.km) Dispersion slop at zero dispersion wavelength:≤0.092ps/(nm2.km) | ||||||
| Technical Parameters: | ||||||
| No. of fibers | sheath Material / color | Fibers Color | Strength member | Cable diameter | Short term tension | Short term crush |
| 2 | LSZH / Black | Blue,Orange | FRP Strength | 3×2 mm | 80 N | 1000N/100mm |
| Test method and Mechanical Characteristic | ||||||
| Tensile Strength | confirm to IEC 794-1-2-E1A | Temperature requirement | Operation | -20℃ - +60℃ | ||
| Crush | confirm to IEC 794-1-2-E3 | Installation | -20℃ - +60℃ | |||
| Impact | confirm to IEC 794-1-2-E4 | Storage/Tran-sportation | -20℃ - +60℃ | |||
| Repeated bending | confirm to IEC 794-1-2-E6 | |||||
| Torsion | confirm to IEC 794-1-2-E7 | Temperature cycling test | confirm to IEC 794-1-F1 | |||
| Flexing | confirm to IEC 794-1-2-E8 | |||||
| Cable bend | confirm to IEC 794-1-2-E11 | Bending Radius | Unloaded | 30 times of outer diameter | ||
| Water penetration | confirm to IEC 794-1-2-F5B | Loaded | 60 times of outer diameter | |||
| XT3006 | Single Mode | XT3007 | Multi mode | |||
| Order Informations: | ||||||
| Marking | HELLOSIGNAL FTTH Drop Cable GJXFH-2 XXX (or Per customer's request) | |||||
| Inner Package | 1000m/Spool (or Per customer's request) | |||||
| Outer Package | Color Box, Pallet (or Per customer's request) | |||||
| Delivery time | Normally 25 days after received the deposit. | |||||
| Brand | HELLOSIGNAL® OR OEM | |||||
Production Process Flow Chart
# 1： Fiber testing
# 2 Fiber core coloring
# 3 Fiber core coloring
#4 Fiber tube producing line
#5 PBT control
#6 Fiber twist
#7 Fiber twist2
#8 Jacket Finishing 1
#9 Jacket Finishing 2
#10 Process testing
#11 Packing
#12 Container Loading
# 2 Fiber core coloring
# 3 Fiber core coloring
#4 Fiber tube producing line
#5 PBT control
#6 Fiber twist
#7 Fiber twist2
#8 Jacket Finishing 1
#9 Jacket Finishing 2
#10 Process testing
#11 Packing
#12 Container Loading