Indoor Fiber cables Round Ribbon type LSZH 10.0mm Aramid Yarn Single-mode cable fibra óptica High-integrated fibre ribbon design

Characteristic: Indoor Fiber cables -High-integrated fibre ribbon design

Cable Type: Round Ribbon type

Fiber Type: G.657.A1 / G.652.D
Jacket Material: PVC/LSZH
Total Fiber Count: 12-144F
Subunit Type: Fibers

Environmental Space: For indoor cables

Armor: No

■ Technical data:

Numbers of fibers: 12-144F

Fiber type: Single mode G.657.A1/OM1/OM2/OM3

Strength Member: Aramid Yard

Loose Tube:  No

Filler Rope:  No

Water Blocking Layer（Material）: No

Additional Strength Member（Material）：No

Outer Sheath:  Low smoke zero halogen (LSZH)

Cable Diameter(±0.2mm): 10*13.5mm

Cable Weight(±10.0kg/km): 80-125kg

Attenuation coefficient :  @ 1310nm≤0.35dB ;   @ 1550nm ≤0.2dB 

Min. bending radius Without Tension: 10.0×Cable-φ

Min. bending radius Under Maximum Tension: 20.0×Cable-φ

■ Description:

indoor ribbon fiber cable uses fiber ribbon(s) as an optical communication medium,Fiber ribbon(s) are put in LSZH loose tube, then wrapped with a layer of aramid yarn as strength member units,and the cable is completed with LSZH(Low smoke,Zero halogens,Flame-retardant) jacket.

■ Application:

• Indoor cable distribution for any purpose

• Interconnect between optical fibre cable distribution equipment

■ Fibre Colors:

■ Jacket Colors:

■ Single mode optical fiber (ITU-T Rec. G.652.D):

Fiber Type: Single mode

Fiber Material: Doped silica

 

Attenuation Coefficient:

• @ 1310 nm: ≤ 0.35 dB/km

• @ 1383 nm: ≤ 0.32 dB/km

• @ 1550 nm: ≤ 0.21 dB/km

• @ 1625 nm: ≤ 0.24 dB/km

 

Point Discontinuity: ≤ 0.05 dB

Cable Cut-off Wavelength: ≤ 1260 nm

Zero-Dispersion Wavelength: 1300 ~ 1324 nm

Zero-Dispersion Slope: ≤ 0.092 ps/(nm².km)

 

Chromatic Dispersion:

• @ 1288 ~ 1339 nm: ≤ 3.5 ps/(nm.km)

• @ 1271 ~ 1360 nm: ≤ 5.3 ps/(nm.km)

• @ 1550 nm: ≤ 18 ps/(nm.km)

• @ 1625 nm: ≤ 22 ps/(nm.km)

 

PMDQ (Quadrature Average): ≤ 0.2 ps/km¹/²

Mode Field Diameter @ 1310 nm: 9.2 ± 0.4 μm

Core / Clad Concentricity Error: ≤ 0.5 μm

Cladding Diameter: 125.0 ± 0.7 μm

Cladding Non-Circularity: ≤ 1.0%

Primary Coating Diameter: 245 ± 10 μm

Proof Test Level: 100 kpsi (= 0.69 GPa), 1%

 

Temperature Dependence:

0°C ~ +70°C at 1310 & 1550 nm

≤ 0.1 dB/km attenuation