Coax Jumper Cable / F Type Cable Supplier | RG6 75 Ohm F-Type Coax Assemblies

Please Select Product Type

Fiber Optic Cables
Fiber Optic Tools
- Fiber Optic Installation Tools/Accessories/Fittings
- FTTH Fiber Optic Tools
- Fiber Termination Tools
- Fiber Optic Test Tools
- OTDR Accessories
- Fiber Optic Cleaning Tools
LAN/Ethernet Cable
- CAT8
- CAT7 / CAT7A
  - CAT7
  - CAT7A
- CAT6A
  - U/UTP
  - U/FTP
  - F/UTP
  - F/FTP
  - S/FTP
  - CAT6A AMOUR/CST
- CAT6
  - U/UTP
  - F/UTP
  - SF/UTP
  - Dual
  - Armour CAT6
- CAT5E
  - U/UTP
  - F/UTP
  - SF/UTP
  - Dual
- Copper Patch Cord Cable
  - CAT5E
  - CAT6
  - CAT6A
  - CAT7
  - CAT7A
  - CAT8
  - Special type
- Ethernet Plenum Cable
- Network Cable
- Copper Trunk Cable
- Direct-Burial Outdoor Ethernet Cables
Coaxial Cable
- Low Loss Cable
- RF Corrugated Coax Cable
  - 1/4"
  - 3/8"
  - 1/2"
  - 7/8"
  - 1 1/4"
  - 1 5/8"
- Radiating Leaky Coaxial Cable
- RG MIL-C-17 Cable
- PTFE-FEP Coaxial Cable
- D-FB Coax Cable
  - D-FB cable
  - Connectors for D-FB cable
  - Grounding Kit, Clamp, Weatherproof for D-FB cable
- 75 ohm Coaxial Cable
  - RG6 coax cable
    - RG6 S
    - RG6 Tri
    - RG6 Q
    - RG6 Dual
  - RG59 coax cable
    - RG59 S
    - RG59 Tri
    - RG59 Q
  - RG11
    - RG11 S
    - RG11 Tri
    - RG11 Q
  - SAT coax cable
  - HD coaxial cable
  - VHF Leaky Feeder Cable
  - Trunk cable/Hardline cable
    - PS
    - QR
  - CT coax cable
  - KX coax cable
  - VATC coax cable
  - PK75 coax cable
- Plenum Coaxial Cable
- EN 50117 Coaxial Cable
  - Broadband double shield SA Class A++ ＞105dB
  - Broadband Triple shield SA Class A++ ＞105dB
  - Digital Drop shield SA Class A+＞95dB
  - Digital Drop shield SA Class A＞85dB
- Coaxial Jumper Cables
  - 1/2" Super Flex Jumper Cable
  - 1/2" Feeder Jumper Cable
  - 3/8" Super Flex Jumper Cable
  - 1/4" Super Flex Jumper Cable
  - RG141 Jumper Cable
  - RG142 Jumer Cable
  - RG58 Jumper Cable
- 50 Ohm Coaxial Cable
- Semi-Flexible Series Cable
Fire, Security & Alarm Cable
- Fire Cables
- Fire Resistance Cable
  - EN50200 PH30 Cable
  - EN50200 PH120 Cable
  - JB-Fire Alarm Cable
  - Standard BS 6387 Cable
  - Standard BS 7629 Cable
  - FRLS & FRFH
    - FRLS & FRFH Unshielded
    - FRLS & FRFH Shielded
  - Silicon Insulation
- Fire Alarm Cable
  - UL Fire alarm cable-MENA
  - UL 1424 FPL Unshielded
  - UL 1424 FPLR Unshielded
  - UL 1424 FPLP Unshielded
  - UL 1424 FPL Shielded
  - UL 1424 FPLR Shielded
  - UL 1424 FPLP Shielded
  - UL 1424 Solid
    - UL 1424 Solid S
    - UL 1424 Solid U
  - UL 1424 Stranded
    - UL 1424 Stranded U
    - UL 1424 Stranded S
  - UL Standard
- CCTV Surveillance Cable
  - Siamese Ethernet Cable
  - Siamese Coaxial Cable
    - RG59+2c
    - RG6+2c
    - Other
  - KVK CCTV Cable
    - КВК-В-1,5
    - КВК-В-2Э
    - КВК-П-1,5
    - КВК-П-2Э
  - Custom CCTV Combined Cable
    - HD
    - PTZ
    - RG59
    - MENA
  - RG6 CCTV
  - RG59 CCTV
  - RG11 CCTV
  - PK75 CCTV
    - Паракс РК 75-2-110
    - Паракс РК 75-2-111
    - Паракс РК 75-2-122
    - Паракс РК 75-2-13M
    - Паракс РК 75-2-310
    - Паракс РК 75-2-311
    - Паракс РК 75-3-313 нг(А)
    - Паракс РК 75-3-314 нг(А)
    - Паракс РК 75-3-315 нг(А)
    - Паракс РК 75-3-316 нг(А)
    - Паракс РК 75-3-32
    - Паракс РК 75-3-322
  - JIS C CCTV
  - MINI CCTV
  - Other
- Burglar Alarm cable
  - Alarm, signal cable
  - Mylar Pair Cable
  - Solid Cond. global alarm cable
  - Stranded Cond.unshielded global alarm cable
  - Stranded Cond.shielded global alarm cable
  - UL Standard security,sound, alarm cable
  - General Purpose
- Access Control Cable
- Fire Alarm System
  - Cables De Alarma Incendio
  - Cabos De Alarme De IncÊndio
- Lutron Cables
- Plenum Security Cables
Voice, Audio & Video Cable
- Flat Telephone Cable
- Circular Audio Speaker Cable
- Circular Shielded Audio Cable
- Multicore Circular Speaker Cable
- Parallel Speaker Cable
- Media Composite Cable
- Coax Jumper Cable/F Type Cable
- Audio Speaker Cable
- Audio XLR Cable
- HDMI
  - HDMI Cable
  - HDMI Extender
- DisplayPort Cable
- DVI Cable
- VGA Cable
- Adaptors
Universal Serial Bus
- USB C Cable
- USB C Converter
- USB Cable
- USB Hub
- USB to Serial Cable
- USB Bluetooth/Network/Sound Adapter
Control Cable
- Fieldbus Cable
- Industrial Ethernet Cable
- PROFINET Cable
- Marine LAN Cable
- Flexible Control Cable
- Chain Cable
- SERVO Motor Cables
- Robotics Cables
Power & Control Cable
- Solar Cable
  - H1Z2Z2-1 Single
  - H1Z2Z2-1 Twin
  - UL4703
  - TUV 2 pfG 2642/01.22
  - Material
- Battery Cable
- General Power Cable
- KNX Cable
- LV Armoured Cable SWA & AWA
- Automotive cable
  - American Standard
    - American Standard Battery Wire
    - American Standard Primary Wire
    - American Standard-More Type Wire
  - Germany Standard
  - Japanese Standard
- High Temperature Cable
  - Silicone 180℃ cable
  - Silicone 200℃ cable
  - Silicone 450℃ cable
- Flex Control Cable
- Sensor & Actuator Cables
- Hook Up wire
other
- Cable Materials
  - CCA WIRE
  - CCAM WIRE
  - Aluminum Foil
  - Al-Mg alloy wire
  - CCS WIRE
  - Enameled aluminum wire（EAL）
  - Enameled copper clad aluminum wire (ECCA)
  - Enameled copper wire(EC)
  - TCCA WIRE
  - TCCAM WIRE
  - Galvanized Steel Wire
  - Stranded Wire

F Type RG6 Cable

Certificates: UL, ETL, CE, RoHS

Add to Basket

More >>

Product Categories

ZION CATEGORY PAGE / AUDIO & VIDEO CABLE

Coax Jumper Cable / F Type Cable

Coax Jumper Cable / F Type Cable is designed for stable 75-ohm signal transmission in CATV, satellite TV, broadband video distribution, and indoor RF interconnection. For buyers and installers, the key decision points are shielding effectiveness, conductor construction, connector compatibility, finished length, and jacket suitability for the installation environment.

75 Ohm Signal LinksRG6 F-Type AssemblyCATV / SATV UseOEM Length CustomizationDual Shield Options

Request Datasheet / Sample

Best suited for 75Ω video and RF distribution where connector compatibility and signal stability matter.
RG6 F-type jumper assemblies are commonly selected for longer in-building CATV or satellite runs.
Custom length, jacket, branding, and connector combinations help align the product with distributor or project requirements.

Contents

Category Overview
Product Range & Options
Construction & Key Features
Applications
Customization Support
FAQ

■ Category Overview

Coax Jumper Cable / F Type Cable products are finished coaxial assemblies built for reliable RF and video signal transfer between source equipment, wall outlets, splitters, set-top boxes, satellite receivers, CATV devices, and broadband distribution points. Compared with loose bulk coax, pre-terminated F-type jumper cables reduce installation time, improve connector consistency, and simplify field deployment.

For engineering and procurement teams, this category is usually selected when the project requires controlled impedance, practical shielding performance, clean termination quality, and repeatable finished lengths for residential, commercial, and light infrastructure video distribution systems.

Category Focus	Typical Choice	Buyer Concern	Why It Matters
Impedance	75Ω	System matching	Helps maintain stable signal transfer in video/RF systems
Connector Interface	F-Type male connectors	Compatibility	Direct mating with common CATV and satellite hardware
Cable Base	RG6 style assembly	Run length and attenuation	Well suited for longer CATV in-building runs
Supply Mode	Pre-terminated jumper cable	Installation efficiency	Reduces field termination workload and improves consistency

When to choose this category: Choose Coax Jumper Cable / F Type Cable when your project needs a ready-to-install 75-ohm coax assembly for TV, CATV, satellite, broadband video distribution, or indoor RF patching where shielding, length accuracy, and connector fit are more important than field-made terminations.

■ Product Range & Options

This category can be organized around practical assembly variations rather than only around one single cable code. The most commercially useful approach is to present buyers with configurable options by cable type, connector format, length, shielding level, jacket type, and branding method.

Range Item	Typical Option	Suitable For	Commercial Note
Cable Construction	RG6 F-Type jumper	Longer in-building CATV runs	Balanced option for mainstream video distribution
Finished Length	Short patch to long customized lengths	Retail packs, installers, projects	Supports packaging and deployment flexibility
Connector Style	Standard F-Type termination	CATV / SATV hardware matching	Can be tuned to project connector preference
Shielding Level	Foil + braid style shielding	Noise-sensitive indoor routes	Useful where video stability matters
Branding	HELLOSIGNAL or OEM marking	Distributors and private-label supply	Supports channel branding and project delivery

■ Construction & Key Features

The provided reference product uses a practical RG6 structure aimed at 75-ohm video distribution. From a buyer’s perspective, the most important engineering factors are conductor material strategy, dielectric stability, shield design, outer diameter, bend handling, and connector assembly quality.

Structure Item	Reference Configuration	Value to Buyer
Inner Conductor	18AWG CCS	Supports mainstream CATV-style coax construction and cost control
Dielectric	Foamed PE	Helps maintain impedance consistency and signal performance
Shield Layer 1	Bonded aluminum polypropylene	Adds coverage against external interference
Shield Layer 2	Aluminum braid, 60% coverage	Improves shielding balance for indoor video links
Jacket	PVC, approx. 6.81mm OD	Common indoor handling and installer familiarity
Electrical Target	75 ± 3 Ω impedance	Matches standard TV/CATV/SATV system expectations

Signal Matching

75-ohm configuration is the core requirement for stable integration with video and CATV distribution equipment.

Shielding Practicality

Foil plus braid structures are widely selected where installers want a good balance between signal protection and assembly cost.

Finished Cable Efficiency

Factory-terminated jumper cables help reduce field errors and support cleaner installation outcomes.

Practical selection rule: If the project is centered on TV, CATV, or satellite signal distribution inside buildings, start by confirming 75-ohm system compatibility, then check shielding level, required jumper length, and connector finish quality before comparing price.

■ Applications

Coax Jumper Cable / F Type Cable is suitable for fixed video distribution points, equipment interconnection, residential and commercial TV systems, and project-based indoor RF cabling where quick deployment and consistent connector quality are required.

CATV Distribution

Useful for indoor cable TV runs, wall plate connections, and splitter-to-device patching.

Satellite TV

Suitable for F-type interconnection between receivers, LNB routing segments, and distribution accessories.

Broadband Video Systems

Supports structured video signal paths where controlled impedance is required.

Installer Stock / OEM Supply

Good fit for packaged jumper assemblies sold through channel partners or used in repeated project rollouts.

■ Customization Support

For distribution, OEM, and project supply, customization is often more important than the base coax structure itself. Buyers typically need the finished cable to match local installation habits, packaging needs, branding rules, and system connection requirements.

Custom Item	Can Be Adjusted	Why Customers Ask For It
Finished Length	Short jumper to long project run	To match actual installation distance and reduce excess cable
Cable Marking	HELLOSIGNAL or OEM brand	For channel branding or project documentation
Connector Combination	Project-based configuration	To align with local equipment interface requirements
Packaging	Bulk, retail, or project pack	To support distribution channels and site installation efficiency

■ FAQ

1. What is the main use of F Type Cable?

It is mainly used for 75-ohm TV, CATV, satellite, and related video signal distribution systems where F-type connector compatibility is required.

2. Why choose a finished coax jumper cable instead of bulk coax?

A finished jumper cable reduces field termination work, improves connector consistency, and helps installers speed up deployment.

3. Is RG6 a good choice for longer runs?

Yes. In this reference configuration, RG6 is positioned for longer CATV run lengths, making it a practical option for many in-building video routes.

4. Can the cable be customized?

Yes. Length, marking, branding, and assembly details can be adjusted for OEM or project requirements.

5. What should buyers verify before ordering?

Confirm impedance, connector compatibility, shielding level, finished length, jacket environment, packaging method, and any OEM marking requirements.

■ Conclusion

Coax Jumper Cable / F Type Cable is a practical finished-cable category for CATV, satellite, and video distribution projects that need dependable 75-ohm transmission and easy installation. For commercial success, the page should not only describe one RG6 assembly, but also clearly show what buyers can customize, where the product is used, and how the cable helps reduce field installation risk.

Need F Type RG6 jumper cable details or OEM support?

Send your required length, connector format, jacket request, and branding details for faster quotation and sample confirmation.

Request Datasheet / Quote Back to Top

Professional OEM - Zion Communication

Request a Quote