Cable & Wire | Good quality and good service based on reasonable prices.
info@zion-communication.com
 |
GYFTY
N/M
N/M
Multi-tube Outdoor Fiber Optic Cables
Multi-tube Outdoor
ISO9001
3km/Spool
Wooden Spool ，Φ1100*750mm
40km
5-25 Days
NINGBO CHINA
30%TT as deposit,70%Balance before shipping.
Characteristic: Multi-tube
Cable Type: Stranded Loose Multi-tube Cable
Fiber Type: G.652.D
Jacket Material: Polyethylene (PE)
Total Fiber Count: 6-8,10-12,14-24,30-72
Subunit Type: Gel-filled
Environmental Space: Aerial, Duct
Armor: No
Numbers of fibers: 6-8,10-12,14-24,30-72
Design(Strength Member+Tube&Filler): Central FRP wires
Fiber type: Single mode G.652.D
Strength Member: NO
Loose Tube: PBT
Filler Rope: No
Water Blocking Layer（Material）: Water Blocking tape
Additional Strength Member（Material）：NO
Outer Sheath: PE
Cable Diameter(±0.2mm): 9.0mm;8.0mm
Cable Weight(±10.0kg/km): 60-80kg
Attenuation coefficient : @ 1310nm≤0.35dB ; @ 1550nm ≤0.2dB
Min. bending radius Without Tension: 10.0×Cable-φ
Min. bending radius Under Maximum Tension: 20.0×Cable-φ
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tube are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. Then, the cable is completed with a PE sheath.
Good mechanical and temperature performance.
High strength loose tube that is hydrolysis resistant.
Special tube filling compound ensure a critical protection of fiber.
Crush resistance and flexibility.
Two parallel steel wires ensure tensile strength
Small diameter, light weight and friendly installation
Long delivery length
Application:duct/aerial
Single mode optical fiber (ITU-T Rec. G.652.D)
· Fiber Type: Single Mode
· Fiber Material: Doped Silica
Attenuation Coefficient:
o @ 1310 nm: ≤ 0.35 dB/km
o @ 1383 nm: ≤ 0.32 dB/km
o @ 1550 nm: ≤ 0.21 dB/km
o @ 1625 nm: ≤ 0.24 dB/km
Point Discontinuity: ≤ 0.05 dB
Cable Cut-off Wavelength: ≤ 1260 nm
Zero-Dispersion Wavelength: 1300 ~ 1324 nm
Zero-Dispersion Slope: ≤ 0.092 ps/(nm²·km)
Chromatic Dispersion:
o @ 1288 ~ 1339 nm: ≤ 3.5 ps/(nm·km)
o @ 1271 ~ 1360 nm: ≤ 5.3 ps/(nm·km)
o @ 1550 nm: ≤ 18 ps/(nm·km)
o @ 1625 nm: ≤ 22 ps/(nm·km)
PMDQ (Polarization Mode Dispersion Quadrature Average): ≤ 0.2 ps/km¹/²
Mode Field Diameter @ 1310 nm: 9.2 ± 0.4 µm
Core / Clad Concentricity Error: ≤ 0.5 µm
Cladding Diameter: 125.0 ± 0.7 µm
Cladding Non-Circularity: ≤ 1.0%
· Primary Coating Diameter: 245 ± 10 µm
· Proof Test Level: 100 kpsi (≈ 0.69 GPa), 1%
· Temperature Dependence:
o Operation: 0°C to +70°C @ 1310 & 1550 nm
o Attenuation Change: ≤ 0.1 dB/km
Characteristic: Multi-tube
Cable Type: Stranded Loose Multi-tube Cable
Fiber Type: G.652.D
Jacket Material: Polyethylene (PE)
Total Fiber Count: 6-8,10-12,14-24,30-72
Subunit Type: Gel-filled
Environmental Space: Aerial, Duct
Armor: No
Numbers of fibers: 6-8,10-12,14-24,30-72
Design(Strength Member+Tube&Filler): Central FRP wires
Fiber type: Single mode G.652.D
Strength Member: NO
Loose Tube: PBT
Filler Rope: No
Water Blocking Layer（Material）: Water Blocking tape
Additional Strength Member（Material）：NO
Outer Sheath: PE
Cable Diameter(±0.2mm): 9.0mm;8.0mm
Cable Weight(±10.0kg/km): 60-80kg
Attenuation coefficient : @ 1310nm≤0.35dB ; @ 1550nm ≤0.2dB
Min. bending radius Without Tension: 10.0×Cable-φ
Min. bending radius Under Maximum Tension: 20.0×Cable-φ
The fibers, 250μm, are positioned in a loose tube made of a high modulus plastic. The tube are filled with a water-resistant filling compound. A steel wire, sometimes sheathed with polyethylene (PE) for cable with high fiber count, locates in the center of core as a metallic strength member. Tubes (and fillers) are stranded around the strength member into a compact and circular cable core. Then, the cable is completed with a PE sheath.
Good mechanical and temperature performance.
High strength loose tube that is hydrolysis resistant.
Special tube filling compound ensure a critical protection of fiber.
Crush resistance and flexibility.
Two parallel steel wires ensure tensile strength
Small diameter, light weight and friendly installation
Long delivery length
Application:duct/aerial
Single mode optical fiber (ITU-T Rec. G.652.D)
· Fiber Type: Single Mode
· Fiber Material: Doped Silica
Attenuation Coefficient:
o @ 1310 nm: ≤ 0.35 dB/km
o @ 1383 nm: ≤ 0.32 dB/km
o @ 1550 nm: ≤ 0.21 dB/km
o @ 1625 nm: ≤ 0.24 dB/km
Point Discontinuity: ≤ 0.05 dB
Cable Cut-off Wavelength: ≤ 1260 nm
Zero-Dispersion Wavelength: 1300 ~ 1324 nm
Zero-Dispersion Slope: ≤ 0.092 ps/(nm²·km)
Chromatic Dispersion:
o @ 1288 ~ 1339 nm: ≤ 3.5 ps/(nm·km)
o @ 1271 ~ 1360 nm: ≤ 5.3 ps/(nm·km)
o @ 1550 nm: ≤ 18 ps/(nm·km)
o @ 1625 nm: ≤ 22 ps/(nm·km)
PMDQ (Polarization Mode Dispersion Quadrature Average): ≤ 0.2 ps/km¹/²
Mode Field Diameter @ 1310 nm: 9.2 ± 0.4 µm
Core / Clad Concentricity Error: ≤ 0.5 µm
Cladding Diameter: 125.0 ± 0.7 µm
Cladding Non-Circularity: ≤ 1.0%
· Primary Coating Diameter: 245 ± 10 µm
· Proof Test Level: 100 kpsi (≈ 0.69 GPa), 1%
· Temperature Dependence:
o Operation: 0°C to +70°C @ 1310 & 1550 nm
o Attenuation Change: ≤ 0.1 dB/km
