Author: Site Editor Publish Time: 16-07-2021 Origin: Site
How to Choose Ethernet Cable Jacket Material Compare PVC, PE, LSZH, PUR and marine sheath options by installation space, fire requirements, weather exposure, chemicals and movement.
The right Ethernet cable jacket is the one that satisfies both the installation environment and the applicable code or project specification. PVC is common for general indoor use, PE is widely used for outdoor and direct-burial constructions, LSZH compounds are selected where low smoke and low halogen-acid emissions matter, and PUR or related rugged compounds suit industrial movement and mechanical stress. These descriptions are starting points, not interchangeable approvals: always confirm the complete cable marking and datasheet for the intended pathway.
The outer jacket protects the cable core during pulling, routing and service. Depending on its compound and construction, it can resist abrasion, moisture, sunlight, oils, chemicals, temperature extremes or repeated movement. It also helps identify the cable and may contribute to the cable's reaction-to-fire performance.
Jacket material alone does not establish an Ethernet category, transmission performance, fire rating or legal suitability. Category performance depends on the complete cable design, while installation approval depends on the finished cable's listing, marking and the rules that apply to the project location.
Pathway: Is the cable in a general indoor area, a vertical riser, an environmental-air space, outdoors, underground, on a machine or aboard a vessel?
Exposure: Check water, UV, oils, coolants, cleaning chemicals, abrasion, crushing, rodents and expected temperature range.
Movement: Separate fixed installation, occasional flexing, continuous flex, torsion and drag-chain duty. A flexible-looking cable is not automatically rated for repeated motion.
Compliance: Identify the adopted electrical code, fire classification, building or marine standard, customer approval and documentation required for acceptance.
| PVC — general indoor applicationsPVC compounds are versatile and cost-effective. Their flexibility, temperature range, flame performance and resistance to oil or chemicals vary by formulation. Select the finished cable by its verified rating rather than assuming that every PVC jacket has the same properties. |
| PE or LDPE — outdoor and direct-burial constructionsPolyethylene is commonly used where moisture resistance and outdoor durability are priorities. UV resistance depends on the compound and additives; black PE is widely used because carbon-black formulations can improve weathering performance. Confirm sunlight resistance, water-blocking construction and direct-burial suitability on the datasheet. |
| LSZH / LSOH — low-smoke, halogen-free compoundsLSZH describes a fire-emission objective, not one universal polymer recipe. It is used where reducing smoke and halogen-acid gas emissions is important, including some public buildings, transport systems and equipment rooms. Ask which flame, smoke and halogen tests the complete cable satisfies. |
| PUR / TPU — industrial mechanical stressPolyurethane jackets are often selected for abrasion, notch, oil and mechanical resistance. Suitable constructions can support flexible, torsional or drag-chain applications, but movement capability belongs to the complete cable design. Check bend radius, cycle rating, speed, acceleration and chemical compatibility. |
| SHF1 / SHF2 — marine and offshore specificationsMarine and offshore projects may specify SHF1 or SHF2 sheathing materials within the IEC 60092 framework. These designations address defined material requirements for shipboard and offshore cables. Confirm the required construction, test evidence, temperature range and approval body instead of treating SHF1 or SHF2 as generic Ethernet ratings. |
In North American building applications, communications-cable markings such as CMP, CMR, CMG, CM and CMX identify listed cable types and their intended pathways. CMP is associated with environmental-air spaces, CMR with vertical risers, and CM or CMG with general-purpose pathways, subject to the adopted code. These are finished-cable classifications—not simple names for PVC, FEP or another jacket resin.
Likewise, an LSZH cable is not automatically a substitute for CMP, and a plenum cable is not automatically halogen-free. Each label answers a different question. For international projects, low-smoke and halogen performance may be verified with tests such as IEC 61034 for smoke density and IEC 60754 for gases evolved during combustion, together with the flame test required by the product specification.
Office or commercial building: Start with the required pathway rating, then select a suitable indoor compound. Do not install outdoor PE cable inside a building unless the cable carries the required indoor listing or transitions according to the applicable code.
Outdoor or underground run: Look for a UV-resistant PE or other outdoor-rated jacket, water-blocking where needed, an appropriate temperature range and an explicit direct-burial rating when the cable will be buried.
Factory or machine: Identify oil, coolant, abrasion, weld spatter, movement and EMI conditions. A suitable industrial Ethernet cable may use PUR, TPE, PVC or another compound depending on the duty.
Shipboard or offshore installation: Confirm the vessel rules, fire and smoke requirements, environmental exposure and any class approval. Review the actual marine LAN cable datasheet and approval scope.
• Ethernet category and required transmission standard
• Shielding, conductor construction, pair count and Power over Ethernet requirement
• Indoor pathway, outdoor exposure, burial method or marine/industrial environment
• Fixed, flexible, continuous-flex, torsional or drag-chain movement
• Temperature range and exposure to UV, water, oils, chemicals or abrasion
• Required cable marking, standards, test reports, approvals, length and packaging
ZION's current LAN and Ethernet cable catalog includes indoor, outdoor, LSZH and plenum-related constructions. Compare the exact model documentation against the project requirements before ordering.
Not universally. LSZH is useful when smoke and halogen-acid gas emissions are important, while PVC compounds can offer cost, flexibility and a wide range of listed constructions. The project specification and pathway decide which is appropriate.
Only when the complete cable is permitted for the indoor pathway or the installation transitions to an approved indoor cable as required. A PE jacket by itself does not provide an indoor fire classification.
No. PUR can provide strong mechanical and oil resistance, but continuous-flex performance also depends on conductor stranding, pair design, shielding, fillers and the complete cable construction. Verify the specified flex type and cycle data.
Certification and compliance references for project review, qualification and purchasing documentation.

Fiber Optic CableAccess and backbone
Ethernet CableCat5e to Cat8
Coaxial CableRF and video signal
Fire, Security & AlarmSafety systems
Voice, Audio & VideoSignal cabling
Power & Control CableEnergy and controlOutdoor, indoor, FTTH and distribution cable lines for access networks, backbone routes and campus deployments.
Telecom & ISP NetworksFTTH, PON, ODN
Data Center InfrastructureServer room cabling
Building Low-Voltage SystemsBMS, AV, weak current
Security & Fire ProtectionAlarm, CCTV, access
Industrial Automation CablePLC, RS485, fieldbus
Energy & Power InfrastructureSolar, battery, power For FTTH / PON access, outdoor fiber deployment, aerial routes, duct routes, direct burial routes, rural broadband and ODN planning.

Use calculators and planning tools for conduit capacity, PoE voltage drop and fiber optic link loss budget work.

