It is used for RS485 communication and low-voltage signal wiring where one 22AWG communication pair and one additional 22AWG core are required in the same cable. Typical uses include BMS, automation, control systems, access control and monitoring networks.

1P means one pair of 22AWG conductors, and 1C means one additional 22AWG single core. This structure is useful when the project needs one RS485 communication pair plus one extra conductor.

Yes. The specification lists 120Ω characteristic impedance, which is a key requirement for RS485 communication cable selection. Buyers should still confirm project distance, baud rate, termination and grounding design before ordering.

The cable uses TC conductors, which means tinned copper. The conductor size is 7×0.25±0.01 mm for both the communication pair and the additional core.

The cable uses AL/PET foil shield, tinned copper drain wire and tinned copper braid. The braid density is listed as ≥80%. This structure supports signal protection in environments where interference may be present.

The listed jacket material is PVC. The jacket color is black, the nominal average jacket thickness is 1.20 mm, and the overall cable diameter is 7.8±0.5 mm.

No. The specification lists rated voltage as 300V and clearly notes “not for power purposes.” This product should be used as a communication or signal cable, not as a power cable.

The operating temperature listed in the specification is -20°C to +60°C. Buyers should confirm the actual installation environment before ordering, especially for outdoor, hot, wet or harsh conditions.

Yes. Sample review is recommended before bulk order, especially for project use. Buyers should check conductor size, cable OD, jacket, printing, shielding, color code and terminal compatibility during sample review.

Yes. Buyers can request the datasheet for engineering review. The datasheet should be used to confirm construction, dimensions, electrical characteristics and application suitability before procurement.

Certificate-related document needs should be confirmed with ZION before order. The supplied specification lists Fire Test: CM, but buyers should confirm the required certificate, test report or compliance document for their specific market or project.

Customization can be discussed based on project requirements. Buyers should confirm jacket material, color, printing, label, packing, construction changes and documentation requirements before quotation.

MOQ is not listed in the provided specification. Buyers should contact ZION with the required construction, quantity, packing and customization requirements so the sales team can confirm the applicable MOQ.

Lead time may be affected by quantity, customization, printing, packing, document requirements and production schedule. Before bulk order, confirm SKU, cable construction, conductor size, insulation color, jacket material, cable OD, shielding requirement, fire test requirement, printing, packing, datasheet, sample approval and required project documents.