| Central stainless tube | One central stainless-steel tube | 1–2 layers, ACS or ACS + AA | Compact retrofit and lower tower-load targets | RTS, crush/torsion limits and fault current |
| Stranded stainless tubes | 1–3 stranded optical units | 2–3 layers, ACS and/or AA/Al | Higher fiber capacity and stronger mechanical duty | Tube count, fiber excess length, diameter and mass |
| Al-covered stainless tube | Central aluminum-covered stainless tube | 1–2 layers, ACS or ACS + AA | Compact design with higher aluminum cross-section | Short-circuit I²t, corrosion and lightning criteria |
| Aluminum tube | One central aluminum tube | 1–2 layers, ACS or ACS + AA | Conductivity, corrosion and vibration-fatigue priorities | Optical capacity, bend/crush limits and fittings |
| Compressed-wire OPGW | Central stainless-steel tube | Compressed ACS inner/outer layers | Higher fault-current and lightning design duty | Current magnitude, duration and lightning level |
| OPPC | Optical unit inside phase conductor | AS/steel plus Al/AA conductor wires | Combined phase-current and communication function | Ampacity and match to adjacent phase conductors |