What to Know About EN 50200 and BS 6387 Fire-Resistant Cable
EN 50200 and BS 6387 use different test arrangements and classifications, so PH and CWZ designations are not simple substitutes. The project specification should state the exact circuit-integrity requirement, test evidence and installation system.
Define the required construction and evidence before comparing price or lead time. A model-specific data sheet, certificate scope, sample approval and batch test plan make the answer usable for both engineering and procurement.
How to Select EN 50200 and BS 6387 Fire-Resistant Cable
The following four factors turn a broad request into a specification that a manufacturer can quote, test and deliver consistently.
Confirm the exact project value, acceptable tolerance, evidence and approval owner.
Confirm the exact project value, acceptable tolerance, evidence and approval owner.
Confirm the exact project value, acceptable tolerance, evidence and approval owner.
Confirm the exact project value, acceptable tolerance, evidence and approval owner.
| Decision factor | What to record | Why it matters |
|---|---|---|
| Required circuit-survival duration | Record the project value, acceptable range and responsible approval source. | This factor changes product selection, testing, installation or the final quotation. |
| Fire, water and mechanical test combination | Record the project value, acceptable range and responsible approval source. | This factor changes product selection, testing, installation or the final quotation. |
| Cable construction and installation method | Record the project value, acceptable range and responsible approval source. | This factor changes product selection, testing, installation or the final quotation. |
| Applicable project standard and evidence | Record the project value, acceptable range and responsible approval source. | This factor changes product selection, testing, installation or the final quotation. |
Engineering and Procurement Questions for EN 50200 and BS 6387 Fire-Resistant Cable
Buyers and engineers often use different language for the same decision. The short answers below connect product selection, project approval and RFQ preparation.
What is the difference between PH30, PH60 and PH120 cable?
The practical difference is determined by required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Compare the alternatives against the route, equipment and approval requirements, then record the selected option in the RFQ and submittal.
What does EN 50200 PH120 mean?
The decision should support en 50200 and bs 6387 fire-resistant cable while documenting required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Use a model-specific data sheet and project acceptance criteria to close the selection.
What is the difference between BS 6387 and EN 50200?
The practical difference is determined by required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Compare the alternatives against the route, equipment and approval requirements, then record the selected option in the RFQ and submittal.
Which cable should be used for emergency fire alarm circuits?
The decision should support en 50200 and bs 6387 fire-resistant cable while documenting required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Use a model-specific data sheet and project acceptance criteria to close the selection.
How to Prepare a EN 50200 and BS 6387 Fire-Resistant Cable Specification
- Describe the system, equipment, route and installation environment.
- Record required circuit-survival duration and fire, water and mechanical test combination with units and tolerances.
- Define the applicable product standard, fire or environmental rating, and approval documents.
- State sample, first-article, routine test and batch traceability expectations.
- Confirm quantity, unit length, packaging, labeling, destination and required delivery window.
Terms that may appear in the technical discussion include PH30 vs PH120, EN 50200 PH120 cable, BS 6387 vs EN 50200, emergency fire alarm cable, fire resistant cable manufacturer, flame retardant vs fire resistant, LSZH fire resistant cable, and circuit integrity cable. Each term should be tied to a measurable requirement or a named product option rather than placed in the RFQ without context.
Project Information Needed for EN 50200 and BS 6387 Fire-Resistant Cable
System function, equipment, distance, topology, installation method and environment.
Conductor or fiber, pairs or cores, shielding, armour, jacket, interfaces and accessories.
Adopted standard, exact certificate scope, test method, report format and acceptance limits.
Quantity, lengths, printing, packaging, destination, documents and delivery window.
Additional EN 50200 and BS 6387 Fire-Resistant Cable Project Questions
What is the difference between flame-retardant and fire-resistant cable?
The practical difference is determined by required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Compare the alternatives against the route, equipment and approval requirements, then record the selected option in the RFQ and submittal.
How do I select LSZH fire-resistant cable?
Start with verified project inputs for required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Show assumptions, units and design margin, then confirm the result against the equipment data sheet and the standard adopted by the project.
What tests apply to circuit-integrity cables?
The decision should support en 50200 and bs 6387 fire-resistant cable while documenting required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Use a model-specific data sheet and project acceptance criteria to close the selection.
Does PH30 mean the cable survives fire for 30 minutes?
Suitability depends on required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Confirm those values for the exact route and equipment before approving the cable, accessory or system configuration.
What does CWZ mean in BS 6387?
The decision should support en 50200 and bs 6387 fire-resistant cable while documenting required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Use a model-specific data sheet and project acceptance criteria to close the selection.
What cable is required for voice evacuation systems?
The decision should support en 50200 and bs 6387 fire-resistant cable while documenting required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Use a model-specific data sheet and project acceptance criteria to close the selection.
Can LSZH cable also be fire-resistant?
Suitability depends on required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Confirm those values for the exact route and equipment before approving the cable, accessory or system configuration.
What is the difference between FRLS and LSZH?
The practical difference is determined by required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Compare the alternatives against the route, equipment and approval requirements, then record the selected option in the RFQ and submittal.
How do I select fire cable for tunnels or metro stations?
Start with verified project inputs for required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Show assumptions, units and design margin, then confirm the result against the equipment data sheet and the standard adopted by the project.
Frequently Asked Questions
What is the difference between PH30, PH60 and PH120 cable?
The practical difference is determined by required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Compare the alternatives against the route, equipment and approval requirements, then record the selected option in the RFQ and submittal.
What does EN 50200 PH120 mean?
The decision should support en 50200 and bs 6387 fire-resistant cable while documenting required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Use a model-specific data sheet and project acceptance criteria to close the selection.
What is the difference between BS 6387 and EN 50200?
The practical difference is determined by required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Compare the alternatives against the route, equipment and approval requirements, then record the selected option in the RFQ and submittal.
Which cable should be used for emergency fire alarm circuits?
The decision should support en 50200 and bs 6387 fire-resistant cable while documenting required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method. Use a model-specific data sheet and project acceptance criteria to close the selection.
Who manufactures EN 50200 fire-resistant cable?
Evaluate a manufacturer against a named construction, applicable standard, model-level evidence, sample process and batch documentation. A useful quotation should address required circuit-survival duration, fire, water and mechanical test combination, cable construction and installation method, rather than relying on a general supplier claim.
Prepare Your EN 50200 and BS 6387 Fire-Resistant Cable Requirement
Submit the application, quantities, route, environment, standards, drawings and test requirements so the offered construction can be mapped to a clear project schedule.
Request Project Support
